Structural characteristics and application of low temperature and constant temperature stirring reaction bath

Issue date:2022/03/08    Views：13    Classification：Technical

Low temperature constant temperature stirring reaction bath is a precision instrument, so you must pay attention to its advantages and disadvantages in the process of purchase and use. The following is the structural characteristics and uses of our low temperature constant temperature stirring reaction bath shared by Jiangsu Tianling Instrument Co., Ltd.:

The low-temperature constant temperature stirring reaction bath can be used as a low-temperature constant temperature water tank for viscosity measurement. There is strong magnetic stirring at the bottom, with two-stage stirring and internal circulation system, with uniform temperature field and no leakage.

10 characteristics of low temperature and constant temperature stirring reaction bath

1. Types of circulating media: silicone oil, water, salt water, pure alcohol and other commonly used circulating media in laboratories.

2. The controller of double window LED display can display the temperature setting value, actual value and over temperature alarm value at the same time; Closed two-stage mixing internal circulation: the internal circulation management is fully closed, without oil mist and water absorption, ensuring the safety of the experiment and the service life of the heat transfer fluid.

3. Mixing method: a two-stage high-power magnetic stirring device is built in. The magnetic steel uses the "neodymium iron jumping" water magnetic rotor with strong magnetic force to ensure sufficient mixing torque. The magnetic steel will not lose magnetism under high temperature. In addition, there is a stirrer in the reaction vessel to stir, so that the temperature of the molten medium is uniform.

4. Space saving: the low-temperature constant temperature stirring reaction bath has compact structure design, desktop type and vertical type limited by the height of the experimental platform.

5. The components that may contact with the working medium, such as the tank liner, top plate, electric heater and evaporator, are made of stainless steel.

6. Protective device: with self diagnosis function; Refrigerator overload protection; High voltage pressure switch, overload relay, thermal protection device and other safety protection functions. The refrigeration system has a variety of protection devices such as time delay, overheating and overcurrent. All imported original high-quality devices ensure reliability and service life.

7. High density corrosion-resistant materials: the key interfaces of circulating pump, cooling coil, discharge outlet and return outlet of recyclable pure water are made of stainless steel (SUS304).

8. Microcomputer control: equipped with microcomputer, it can carry out high-precision control and has various safety performance; All operations are completed by pressing the touch soft key on the microcomputer intelligent controller, which is simple and intuitive.

9. Energy saving: equipped with imported frequency conversion compressor, frequency conversion adjustment is made according to the circulating load and the motor power of the refrigerator.

10. P.I.D. control: try to eliminate external factors that affect the accuracy of temperature regulation and reduce the error.